Operations Details:

  1. Turn on the power: Press the button so that the LED is on and the treatment mode indicator arrow points to storage mode. At this time, the intensity is 0 and the treatment time is set to 15 minutes.
  2. Select treatment mode: Press the function selection button to choose between storage, massage, manipulation, slimming, acupuncture, scraping, cupping, immune regulation and rhinitis modes.
  3. Adjust intensity: Press the intensity button and adjust to a suitable level.

Precautions:

  • If you need to use the massager again, press the power button and repeat the procedures above.
  • If you change treatment modes during treatment, the treatment intensity will automatically be set to level 0. Simply switch to a suitable level.
  • If you change the treatment area during the treatment, that is, if you change the positions of the electrodes, you must first press the power button to turn off the massager and repeat the procedures above.
  • When completing the treatment, press the power button to turn off the massager before removing the electrodes.
  • When removing the electrodes from the massager, pull the plug instead of the wire.
  • It is not recommended for pregnant women.

Storage and Maintenance Methods:

  • Cleaning the machine: Clean the machine with a soft cloth. Do not use diluents, gas or volatile liquids.
  • Cleaning the electrodes: Clean stains on the electrodes with a damp cloth or rinse them in clean water and dry them immediately before using them again.
  • Storage: Keep the massager out of the reach of children. Keep it away from damp places, high temperatures, strong direct sunlight or water.

Settings:

  • Machine accessories: a set of machine, two electrode wires with four electrodes, two pairs of stickers, USB line, RHINITIS line and an instruction book.
  • Electrode adhesives are consumables whose service life is 20 to 25 times. We recommend having a few extras for your own good.
  • This machine is suitable for other electrode parts; If you have any questions, please contact us.

How to Use (Must be read carefully before purchase):

Step 1: Place the electrode pads on the body.

(Note: 2 electrode pads / 4 electrode pads must be connected at the same time).

Step 2: Connect the electrode pads to the electrode wires and connect to the device.

Step 3: Turn on the device, set the mode and adjust the speed.

Preparations:

  • Prepare the electrodes: Carefully remove the stickers and place them on the reel when finished using.
  • Electrode position: Clean the treated area with a damp towel to eliminate oil or perspiration stains. Then, stick the electrodes directly to the treated areas. Note: The two electrodes must be placed on the body surface at the same time, otherwise the treatment cannot be carried out. Symmetrical electrode placement is not required.







Poderá interessar-lhe

Cursor
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20
Example product title
€40,20
€51,05
€40,20